Connecting to another camera, Previous access points – Canon PowerShot G1 X Mark II User Manual
Page 157
157
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
To add multiple devices, repeat this procedure from the first step.
•
For better security, you can require password input on the screen in step 3
by accessing MENU (
) and choosing [
3] tab > [Wi-Fi Settings] >
[Password] > [On]. In this case, in the password field on the device in step 4,
enter the password displayed on the camera.
•
Once you have assigned a connection destination to Touch Actions (
),
you can prepare the camera to reconnect to the destination simply by dragging
across the screen with the assigned gesture.
Previous Access Points
You can reconnect to any previous access points automatically by following
step 3 in “Connecting without an Access Point” (
•
To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
•
When reconnecting via a previous access point, connect the target
device to the access point in step 4.
•
To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Connecting to WPS-Compatible Access Points” from step
5 (
).
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
•
Only Canon-brand cameras equipped with a Wi-Fi function can be connected
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot
be connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS
cameras with this camera.
1
Access the Wi-Fi menu
).
2
Choose camera.
z
z
Press the <
o><p><q><r> buttons or
turn the <
7> dial to choose [4], and
then press the <
m> button.
3
Choose [Add a Device].
z
z
Press the <
o><p> buttons or turn the
<
7> dial to choose [Add a Device], and
then press the <
m> button.
z
z
Follow steps 1 – 3 on the target camera
too.
z
z
Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.