Canon imagePROGRAF iPF6400S - Manual (Page 142)

iPF6400S Basic Guide
142
Er
ror M
essa
ge
Me
ssa
ges
r
egar
ding
pa
per
Cause Corrective Action
1. Remove the paper and press the OK button.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.")➔P.21
(See "Loading Rolls in the Printer.")➔P.14
Cannot feed paper.
Cause Corrective Action
Paper could not be advanced
correctly during feeding. 1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")➔P.102
(See "Clearing a Jammed Sheet, Fed Manually.")➔P.105
3. Load the paper.
(See "Loading Rolls in the Printer.")➔P.14
(See "Loading Sheets in the Feed Slot.")➔P.21
4. If Not finished printing. Finish printing remaining jobs? is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Paper could not be advanced
correctly during ejection. 1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")➔P.102
(See "Clearing a Jammed Sheet, Fed Manually.")➔P.105
Cannot cut paper.
Cause Corrective Action
There are sheets left on the
Ejection Guide. 1. Press the OK button and remove the paper.
2. Load paper.
3. If Not finished printing. Finish printing remaining jobs? is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")➔P.14
There is a foreign object by the
Output Tray, obstructing the
Cutter Unit. 1. Lift the Top Cover and remove the foreign object.
2. If Not finished printing. Finish printing remaining jobs? is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
You are not using the printer
under the recommended
environmental conditions for the
paper. Use the printer only where the recommended environmental conditions for the paper
are met. Note that various environmental conditions are recommended for various
types of paper. For details on the recommended environmental conditions, see the
Paper Reference Guide.
(See "Paper Reference Guide.")
You are using paper that is not
compatible with automatic cutting. 1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")➔User's Guide
For information about paper that is compatible with automatic cutting, see the
Paper Reference Guide.
(See "Paper Reference Guide.")
2. Press the OK button and remove the paper.
In other cases, the Cutter Unit
may be damaged. Contact your Canon dealer for assistance.