Canon imagePROGRAF iPF6400S - Manual (Page 150)

iPF6400S Basic Guide
150
Er
ror M
essa
ge
Me
ssa
ges
r
egar
ding
pr
inti
ng
or
a
djus
tm
ent
Please commn calibrt using above paper.
Cause Corrective Action
It is now recommended that you
execute Common calibration.
Note that this is displayed when
Set Exec. Guide in the Control
Panel menu is set to On and any
of the following is true.
• If the printer is loaded with a
type of paper on which color
calibration cannot be executed
and the predefined conditions
since executing the Common
calibration the last time have
been reached.
• Although a media type that
color calibration can be
executed on is loaded in the
printer, there is no record or
performing color calibration on
that media, and the designated
criteria from executing
Common calibration the last
time have been reached.
Execute Common calibration.
(See "Color Calibration Using the Printer Sensor.")➔User's Guide
Set Set Exec. Guide to Off on the Control Panel menu.
(See "Menu Structure.")➔P.66
Please calibrate using above paper.
Cause Corrective Action
It is now recommended that you execute Unique calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is
set to On and any of the following is true.
• If the printer is loaded with a type of paper on which color calibration can be
executed, but there is no record of having executed color calibration on
that paper or a record of having executed Common calibration other any
other type of paper.
• If the printer is loaded with a type of paper on which color calibration can be
executed, there is a record of having executed color calibration on that
paper, and the predefined conditions since executing the color calibration
the last time have been reached.
• The Spectrophotometer Unit (optional) is installed. Although a media type
that color calibration can be executed on using the Spectrophotometer Unit
is loaded in the printer and the result of a color check on that media
exceeded the threshold value, the color calibration has not been
performed.
(See "Color Checks Using the Spectrophotometer Unit (option).")➔User's
Guide
Execute Unique calibration.
(See "Color Calibration Using the Printer
Sensor.")➔User's Guide
(See "Color Calibration Using the
Spectrophotometer Unit (option).")➔
User's Guide
Set Set Exec. Guide to Off on the
Control Panel menu.
(See "Menu Structure.")➔P.66
Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side opposite
● when a borderless print job was received. Before borderless printing, set the blue Switch on the platen
to the
● side.
(See "Setting the Blue Switch on the Platen.")➔P.120