Canon imagePROGRAF iPF6400S - Manual (Page 24)

iPF6400S Basic Guide
24
Handl
ing
P
ape
r
H
andli
ng shee
ts
Loading Heavyweight Sheets in the Front Paper Feed Slot
Important
• Always load POP Board in the Front Paper Feed Slot for printing. Loading it in other ways may
impair operation and damage the printer.
• One sheet of paper can be loaded at a time. Do not load multiple sheets. This may cause
paper jams.
• Straighten paper if it is warped before loading it.
• Load the paper straight. Loading paper askew will cause an error.(See "Paper loaded
askew..")➔P.141
• Once you load the paper, you cannot shift it sideways. Load the paper straight.
• If paper other than POP Board is loaded in the Front Paper Feed Slot, you might not be able to
shift the paper or pull it out from the front.
Note
• Store unused paper in the original package, away from high temperature, humidity, and direct
sunlight.
Follow the steps below to perform loading procedures in a printer with no Spectrophotometer Unit
(option).
When using a printer with a Spectrophotometer Unit (option), see "When using the
Spectrophotometer Unit(option)."➔P.27
1 If the message Leave 70cm (28") space
behind printer. is displayed, check the space
behind the printer, pull up the four Front Tray
Guides above the Ejection Guide, and press the
OK button.
Note
• Sufficient space behind the printer is required when loading paper in the Front Paper
Feed Slot. For details on the installation space required, see "Specifications."➔User's
Guide