Canon PowerShot SX170 IS - Manual (Page 127)

127
ç Contents ç Chapter Contents
• After you set the shutter speed or aperture value, the
exposure level may change if you adjust the zoom or
recompose the shot.
• Screen brightness may change depending on your
specified shutter speed or aperture value. However,
screen brightness remains the same when the flash is up
and the mode is set to [ h].
• To have the setting you did not configure in step 2
(whether shutter speed or aperture value) automatically
adjusted to obtain standard exposure, hold the shutter
button halfway and press the < b> button. Note that
standard exposure may not be possible with some
settings.
• [ D]: Manual
• Calculation of standard exposure is based on the specified metering
method ( = 98 ).