Canon PowerShot SX170 IS - Manual (Page 175)

175
ç Contents ç Chapter Contents
Screen Brightness
Adjust screen brightness as follows.
z z Choose [LCD Brightness], and
then press the < q><r> buttons
to adjust the brightness.
• For maximum brightness, press and hold the < l> button for at
least one second when the shooting screen is displayed or when
in single-image display. (This will override the [LCD Brightness]
setting on the [ 3] tab.) To restore the original brightness, press and
hold the < l> button again for at least one second or restart the
camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen
normally shown when you turn the camera on.
z z Choose [Start-up Image], and
then choose [Off].