Canon PowerShot SX170 IS - Manual (Page 218)

218
ç Contents ç Chapter Contents
Disabling Eye-Fi Transfer
Configure the setting as follows to disable Eye-Fi transfer by the
card, if necessary.
Choose [Disable] in [Eye-Fi
trans.].
z z Press the < n> button,
choose [Eye-Fi Settings] on
the [ 3] tab, and then press the
< m> button.
z z Choose [Eye-Fi trans.], and
then choose [Disable].
• [Eye-Fi Settings] is not shown unless an Eye-Fi card is
in the camera with its write-protect tab in the unlocked
position. For this reason, you cannot change settings for
an inserted Eye-Fi card if the write-protect tab is in the
locked position.