Canon PowerShot SX170 IS - Manual (Page 128)

128
ç Contents ç Chapter Contents
Still Images
Adjusting the Flash Output
Choose from the three flash levels in [ D] mode.
1
Enter [D] mode.
z z Set the mode dial to [ D].
2
Configure the setting.
z z Press the < m> button, choose
[ X] in the menu, and adjust the
setting by either pressing the
< o><p> buttons or turning the
<5> dial ( = 43 ).
z z Once the setting is complete,
[ X] is displayed.
• You can also set the flash level by accessing MENU ( = 45 ) and
choosing [ 4] tab > [Flash Settings] > [Flash Output].
• You can set the flash level in [ M] or [B] mode by accessing
MENU ( = 45 ) and choosing [ 4] tab > [Flash Settings] > [Flash
Mode] > [Manual].
• You can also access the [Flash Settings] MENU screen by pressing
the < r> button and then the <n> button.