Canon PowerShot SX170 IS - Manual (Page 64)

64
ç Contents ç Chapter Contents
• When you specify multiple shots, image brightness and white
balance are determined by the first shot. More time is required
between shots when the flash fires or when you have specified to
take many shots. Shooting will stop automatically when the memory
card becomes full.
• When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-
right corner.
However, note that date stamps cannot be edited or removed, so
confirm beforehand that the date and time are correct ( = 26 ).
1
Configure the setting.
z z Press the < n> button,
choose [Date Stamp ] on the
[ 4] tab, and then choose the
desired option ( = 45 ).
z z Once the setting is complete,
[ ] is displayed.