Canon PowerShot SX170 IS - Manual (Page 145)

145
ç Contents ç Chapter Contents
Choosing Images Individually
1
Choose [Select].
z z Following step 2 in “Using
the Menu” ( = 144 ), choose
[Select] and press the < m>
button.
2
Choose an image.
z z Press the < q><r> buttons or
turn the < 5> dial to choose
an image, and then press the
< m> button. [ ] is displayed.
z z To cancel selection, press the
< m> button again. [ ] is no
longer displayed.
z z Repeat this process to specify
other images.
3
Protect the image.
z z Press the < n> button.
A confirmation message is
displayed.
z z Press the < q><r> buttons or
turn the < 5> dial to choose
[OK], and then press the < m>
button.
• Images will not be protected if you switch to Shooting
mode or turn the camera off before finishing the setup
process in step 3.