Canon imagePROGRAF iPF6450 - Manual (Page 431)

Note
• You can select only after Driver Matching Mode has been selected in Matching Mode.
• Gamma
You can adjust the gradation of intermediate tones in an image. 2.2 is normally selected. If you want a softer im-
pression than 2.2, select 1.8.
Note
• You can select only after Driver Matching Mode has been selected in Matching Mode.
• Input Profile
Select the input profile.
Note
• You can select only after ICC Matching Mode has been selected in Matching Mode.
• Printer Profile
Select the printer profile.
Note
• You can select only after ICC Matching Mode has been selected in Matching Mode.
• Soft Proof
When you place a checkmark here, ColorSync applies to the layout area.
Note
• You can select only after ColorSync has been selected in Matching Mode.
iPF6450 Matching (Mac OS X)
User's Guide
Mac OS X Software
Free Layout
431