Canon imagePROGRAF iPF6450 - Manual (Page 542)

Note
• If it is difficult to perform operations from the front of the printer, perform operations from the back of the printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform operations
from the front of the printer. (See "Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manually.")
→P.555
7
Holding the Roll Holder flange (a), remove the holder from
the Roll Holder Slot.
Note
• For instructions on removing rolls from the Roll Holder, see "Removing Rolls From the Roll Holder." →P.542
8
Close the Roll Feed Unit Cover.
Note
• To load new paper in the printer at this point, see "Loading Rolls in the Printer." →P.536
Removing Rolls From the Roll Holder Removing Rolls From the Roll Holder
1
Remove the Holder Stopper from the Roll Holder.
Removing Rolls From the Roll Holder iPF6450
User's Guide
Handling and Use of Paper
Handling rolls
542