Canon imagePROGRAF iPF6450 - Manual (Page 670)

Setting Item Description, Instructions
Interface
Setup Interface Print Print interface settings information.
Return Defaults Choose OK to restore Interface Setup settings to the default
values.
System
Setup Sleep Timer Specify the period before the printer enters sleep mode.
Shut Down Timer Sets the time until the printer turns off automatically. If no oper-
ations are performed on the printer for the duration of the time
set in Shut Down Timer after entering Sleep mode, the printer
automatically turns off.
Buzzer Choose On for the buzzer to sound once for warnings and
three times for errors.
Contrast Adj. Adjust the Display Screen contrast level.
Date &
Time Date Set the current date.
Time Set the current time. Available only if the Date setting is speci-
fied.
Date Format Specify the date format.
Language Specify the language used on the Display Screen.
Time Zone Specify the time zone. Time zone options indicate a main city
in this time zone and the difference from Greenwich Mean
Time.
Length Unit Choose the display unit for length. Change the unit displayed
for the remaining amount of roll paper, Tot.Print Area, and so
on.
Detect Mismatch Specify printing behavior if the type and size of paper specified
in the printer menu does not match the type and size in the
printer driver.
Choose Pause to have printing paused under these circum-
stances. Choose Warning to continue printing after notifica-
tion. Choose None to continue printing without notification.
Choose Hold Job to store jobs with mismatched types and
sizes of paper on the printer hard disk, in a print queue await-
ing processing. (See "Using the Printer Hard Disk.")
→P.752
Paper
Size Ba-
sis Roll Selection 1 If roll size detection is activated, choose whether ISO A3
(297mm) or 300mm Roll is applied when a roll of an inter-
mediate width is detected.
Roll Selection 2 If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when a roll of an inter-
mediate width is detected.
Keep Paper Size Choose On to use the paper size setting as the basis for print-
ing instead of other settings. The margin setting of the printer
menu will be used instead of the margin setting of the printer
driver if the latter is smaller, which may prevent text or images
in the margin from being printed.
Menu Settings iPF6450
User's Guide
Control Panel
Printer Menu
670