Canon imagePROGRAF iPF6450 - Manual (Page 668)

Setting Item Description, Instructions
Adjust
Printer Calibra-
tion ColorCheck Print (*2) (See "Color Checks Using the Spectrophotometer Unit (op-
tion).")
→P.835
The same as ColorCheck Print in the hierarchy under Test
Print.
Pattern Size (*2) Select the size of the adjustment pattern printed during color
calibration using the optional Spectrophotometer Unit and dur-
ing ColorCheck Print.
Normally, set to Standard.
We recommend that you set it to Large if you want to prioritize
measurement accuracy.
Calibration Log The Date, Paper Type, and Adjustment Type for which color
calibration was executed are displayed on the Display Screen
where you can confirm them.
Common calibration and unique calibration are the Adjust-
ment Type of color calibration.
When paper is set in the printer, the history of effective color
calibration for the set paper is displayed.
When paper is not set in the printer, the latest history among
common calibration or unique calibration is displayed.
Also, a hyphen (-) is displayed when there are no execution re-
sults.
(See "Color Calibration Using the Printer Sensor.")
→P.826
(See "Paper that can be used in Color Calibration.") →P.839
Use Adj. Value Choose Disabled > OK if you prefer not to apply the color cali-
bration adjustment value in print jobs. However, printer driver
settings are given priority.
Choose Enabled > OK to apply the color calibration adjust-
ment value in print jobs. However, printer driver settings are
given priority.
Set Exec. Guide If you select On, a message is displayed on the control panel
at the timing recommended for executing color calibration.
Return Defaults Clear the color calibration adjustment value and the execution
log.
Mainte-
nance Head Cleaning Clean the Printhead. (See "Cleaning the Printhead.")
→P.928
Choose Head Cleaning A if printing is faint, oddly colored, or
contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if printing
is not improved by Head Cleaning A.
Nozzle Check Print a test pattern to check the nozzles.
Replace P.head Execute when replacing the Printhead. Follow the instructions
displayed to complete the required procedure. (See "Replacing
the Printhead.")
→P.929
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Repl. maint cart Execute when replacing the Maintenance Cartridge. Follow the
instructions displayed to complete the required procedure.
(See "Replacing the Maintenance Cartridge.")
→P.936
Head In-
fo Printhead L Indicates information about the printhead.
Printhead R
Clean Platen Move the Carriage in preparation for cleaning the Platen.
Menu Settings iPF6450
User's Guide
Control Panel
Printer Menu
668