Canon imagePROGRAF iPF6450 User Manual
Page 952
4
Wipe the surface of the Spectrophotometer Eject Guide
and the surface of the White/Black Backing Plate clean
with a dry, soft cloth.
If it is particularly dirty, use a damp cloth that you have
wrung out completely to wipe clean and use a dry cloth
to dry the surface.
Warning
•
Never use flammable solvents such as alcohol, benzene, or thinner. If these substances come into contact with elec-
trical components inside the printer, there is a risk of fire or electrical shock.
Important
•
When handling the White/Black Backing Plate, do not touch
the white backing plate (a) or black backing plate (b) directly
with your hands.
If the surface becomes dirty or scratched, the printer may not
be able to obtain the correct color measurement results.
•
Make sure that no dirt remains in the grooves on both
ends of the Spectrophotometer Eject Guide.
If any dirt remains, the printer may not be able to obtain
the correct color measurement results.
Cleaning the Paper presser
Dirt on the surface of the Paper presser may be transferred onto the paper or the White/Black Backing Plate.
1
Turn the printer off.
(See "Turning the Printer On and Off.")
2
Unplug the power cord from the outlet.
Caution
•
Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the print-
er on poses a risk of injury if you touch moving parts inside the printer.
3
If the Up-down Unit is lowered, open the Spectropho-
tometer Unit Cover and lift up the central part (near the
blue label) of the Up-down Unit.
Important
•
Lifting up the ends of the Up-down Unit may cause damage.
Cleaning the Spectrophotometer Unit (option) Parts
iPF6450
Maintenance and Consumables
Cleaning the Printer
952