Americana Appliances CDR-850 - Manual (Page 26)

26
<PRE1282>
En
Balanced output level setting.
In the MENU the output reference level of the unit may be
set, this applies only to the balanced (XLR type) connectors.
1
Press the MENU button until “O-LEV” is
displayed.
2
Press the
41 ¡¢ (search) buttons to
select the required reference level of the
balanced output signal. HI level is +4dBu, LO
level is –8dBu.
• Initial setting is LO
• When the original setting is changed, a question mark “?”
appears on the screen next to the selected option.
3
Press the SKIP ID SET button to memorize the
setting.
• The question mark “?” is removed from the display and the
new setting is memorized.
4
Press the
7 button to exit the menu mode.
CONNECTION WITH OTHER EQUIPMENT
1
MENU
2
3
SET
SKIP ID
CLEAR
1 3 2
4
1 2 3
REPEAT
FADER
TRACK NO.
WRITE
2
4
4