AMX SIP Communications Gateway CSG-500 - Manual (Page 19)

Installation
11 CSG SIP Communications Gateway Operation/Reference Guide
There are indicators on both the bracket and the mounting clips to show which end is the “top” to ensure
correct mounting orientation (see FIG. 5).
FIG. 6 illustrates the correct mounting orientation of the DIN Rail Mounting Bracket:
The bracket has a notched side to indicate the top of the piece. The DIN mounting
clips also have two holes drilled in the top portion of the clips that indicate the top of
the clip.
FIG. 5 AC-DIN-CS3 - Clip/Bracket assembly (attach to CSG)
FIG. 6 AC-DIN-CS3 DIN Rail Mounting Bracket - mounted on a DIN rail
Notch indicates top of the bracket
Bracket DIN Mounting Clips
(2 per bracket)
Drilled holes indicate
top of the clip
DIN Rail
DIN Mounting Clip
attached to the bracket
Bracket
(mounts to the CSG)
This notch indicates
These two holes indicate
the top of the bracket
the top of the mounting
clips
(2 clips per bracket)
(35mm)