Ip multicast cli commands, Ip multicast implementation in the avaya p332g-ml – Avaya P332G-ML User Manual
Page 113
Chapter 11 Avaya P330 Layer 2 Features
Avaya P332G-ML User’s Guide
97
becoming aware of a Multicast group on a certain VLAN and starting to filter
traffic for this group.
IP Multicast CLI Commands
The following table contains a list of the CLI commands for the IP Multicast feature.
The rules of syntax and output examples are all set out in detail in the Reference
Guide.
IP Multicast Implementation in the Avaya P332G-ML
This section describes the implementation of the IP multicast feature in the Avaya
P332G-ML
:
•
No. of multicast groups — 1000
In order to...
Use the following command...
Enable or disable the IP multicast
filtering application
set intelligent-multicast
Define aging time for client ports
set intelligent-multicast client port
pruning time
Define aging time for router ports
set intelligent-multicast router port
pruning time
Define group filtering time delays
set intelligent-multicast group-
filtering delay time
Display the status IP multicast
filtering application
show intelligent-multicast
Shows whether the connected
unit’s hardware supports IP
multicast filtering
show intelligent-multicast
hardware-support