Avaya P332G-ML - Manual (Page 54)

Chapter 7 Establishing Switch Access
38 Avaya P332G-ML User’s Guide
Defining new local users
Define new users and access levels using the following command in Supervisor
Level:
Exiting the Supervisor Level
To exit the Supervisor level, type the command exit.
Entering the CLI
To enter the CLI, enter your username and password. Your access level is indicated
in the prompt as follows:
The User level prompt is shown below:
Cajun_P330-N>
The Privileged level prompt is shown below:
Cajun_P330-N#
The Configure level prompt for Layer 3 configuration is shown below:
P330-N(configure)#
The Supervisor level prompt is shown below:
Cajun_P330-N(super)#
In order to... Use the following command...
Add a local user account and
configure a user (name, password
and access level) username
To remove a local user account no username
Display the username, password
and access type for all users on the
switch show username