Avaya P332G-ML - Manual (Page 68)

Chapter 8 User Authentication
52 Avaya P332G-ML User’s Guide
Telnet Client Support
Introduction to Telnet
The P330ML supports invocation of a Telnet client from the CLI. The Telnet client
implementation enables you to control the destination port for connecting daemons
that listen on a non-default port.
Authentication when connecting to the switch via Telnet is identical to standard
console connection authentication (local or RADIUS).
L Enabling and disabling the Telnet-client service can only be done using a direct
console connection via the Console port.
By default the Telnet-client service is disabled.
Telnet Commands
The following Telnet commands are available.
For a complete description of the Telnet CLI commands, including syntax and
output examples, refer to Avaya P330: Reference Guide.
In order to... Use the following command...
Open a Telnet session to another
device. telnet
Enable Telnet access from the
switch ip telnet-client enable
Disable Telnet access from the
switch no ip telnet-client