Ethernet configuration cli commands – Avaya P332G-ML User Manual
Page 93
Chapter 11 Avaya P330 Layer 2 Features
Avaya P332G-ML User’s Guide
77
Ethernet Configuration CLI Commands
The following table contains a list of the configuration CLI commands for the
Ethernet feature. The rules of syntax and output examples are all set out in detail in
the Reference Guide.
In order to...
Use the following command...
Set the auto negotiation mode of a
port
set port negotiation
Administratively enable a port
set port enable
Administratively disable a port
set port disable
Set the speed for a 10/100 port
set port speed
Configure the duplex mode of a
10/100BASE-T port
set port duplex
Configure a name for a port
set port name
Set the send/receive mode for flow-
control frames for a full duplex port
set port flowcontrol
Set the flow control advertisement
for a Gigabit port when performing
autonegotiation
set port auto-negotiation-
flowcontrol-advertisement
Set the priority level of a port
set port level
Display settings and status for all
ports
show port
Display per-port status information
related to flow control
show port flowcontrol
Display the flow control
advertisement for a Gigabit port
used to perform auto-negotiation
show port auto-negotiation-
flowcontrol-advertisement
Display the CAM table entries for a
specific port
show cam
Display the CAM table entries for a
specific MAC address
show cam mac
Clear all the CAM entries.
clear cam
Display the autopartition settings
show autopartition