Avaya P332G-ML - Manual (Page 77)

Avaya P332G-ML User’s Guide 61
Chapter 10
Switch Configuration
Introduction
This chapter describes the parameters you can define for the chassis, such as its
name and location, time parameters, and so on. In addition, this chapter describes
methods for saving and deploying device configurations and monitoring CPU
utilization.
Basic Switch Configuration
Use the CLI commands briefly described below for configuring the display on your
terminal or workstation.The rules of syntax and output examples are all set out in
detail in the Reference Guide.
In order to... Use the following command...
Open a CLI session to a P330
module in the stack, ATM or WAN
expansion modules, and Media
Gateway Processor of G700. session
Display or set the terminal width
(in characters) terminal width
Display or set the terminal length
(in lines) terminal length
Display or set the prompt hostname
Return the prompt to its default
value no hostname
Clear the current terminal display clear screen
Set the number of minutes before
an inactive CLI session
automatically logs out set logout
Display the number of minutes
before an inactive CLI session
automatically times out show logout