American Dynamics RAS917WLS-1 - Manual (Page 113)

DOME NUMBER: ___________________ LOCATION: ________________________
Set North Position
Describe North position:
Area Boundaries
Up to 16 areas can be programmed. Use this form to identify the start and end points of each area. This will assist you in restoring the boundaries if the areas should be erased.
Area Number Start Point End Point
Area 1
Area 2
Area 3
Area 4
Area 5
Area 6
Area 7
Area 8
Area 9
Area 10
Area 11
Area 12
Area 13
Area 14
Area 15
Area 16
Privacy Zones
Up to eight Privacy Zones can be programmed. Use this form to identify the number of Privacy Zones programmed and areas being obscured.
Number Description
Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8
Scan Limits
Scan Limit Description
Left
Right
On-Screen Text Display
Menu Item Default Setting (Choices) Current Setting
Status Display Off (On / Off)
Disable All Names No (Yes / No)
Diagnostic Display Off (On / Off)
Direction Indicator Off (On / Off)
Dome Configuration Records R–3