HP XP Racks - Manual (Page 233)

KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation
name = set, completion time = yyyy/mm/dd hh:mm:ss
#
-lic
Specify this option for when a license is updated. The HDLM license is
provided via a license key or license key file. A license key file is a file
that stores the HDLM license key.
If a license key file is provided:
Store the license key file named hdlm_license directly under /var/
tmp, and then execute the set -lic operation. A message confirming
that the license key has been registered is displayed, depending on
the license key type defined in the license key file. When a temporary
license key or emergency license key has been registered, the
expiration period is displayed (KAPL01071-I, KAPL01072-I).
If a license key is provided:
When the set -lic operation is executed, a message (KAPL01068-I)
asking the user to enter a license key appears. Enter the license key.
A message confirming that the license key has been registered is
displayed, depending on the license key type described in the license
key file. When a temporary license key or emergency license key, the
expiration period is also displayed (KAPL01071-I, KAPL01072-I).
The following table lists and describes the license key types.
Table 6-6 License Key Types
Type Description
Permanent license key Permanent licenses are valid for using HDLM permanently.
Temporary license key # Temporary license key are used temporarily, for example,
when a user needs to perform product evaluations.
Temporary licenses keys are valid for 120 days after the
installation. You cannot reuse a temporary license key.
Emergency license key Emergency license keys are used temporarily, for example,
when waiting for issuing a permanent license key to be
issued. Emergency licenses keys are valid for 30 days after
they are entered. You cannot reuse an emergency license
key.
#
A temporary license key cannot be installed by using the dlnkmgr set
operation.
Example 1
The following example shows how to update the license key when the
license key file exists:
# /usr/DynamicLinkManager/bin/dlnkmgr set -lic
Command Reference
6-27
Hitachi Dynamic Link Manager User Guide for AIX®