HP XP Racks - Manual (Page 51)

Table 2-7 Types of error information
Log name Description Output destination
Integrated trace
file
Operation logs of the HDLM
command are collected.
The default file path is /var/
opt/hitachi/HNTRLib2/
spool/hntr2[1-16].log.
To specify the output
destination directory and the
file prefix for the integrated
trace file, use a Hitachi
Network Objectplaza Trace
Library (HNTRLib2) utility.
Trace file Trace information on the HDLM
manager is collected at the level
specified by the user. If an error
occurs, you might need to change
the settings to collect trace
information.
The trace file name is /var/
DynamicLinkManager/log/
hdlmtr[1-64].log
Error log Error information is collected for the
user-defined level. By default, HDLM
collects all error information.
HDLM Manager logs:
/var/
DynamicLinkManager/
log/dlmmgr[1-16].log
Hitachi Command Suite
Common Agent Component
logs:
/var/
DynamicLinkManager/
log/dlmwebagent[1-
N].log
The value n depends on
the setting in the file
dlmwebagent.propertie
s.
HDLM utility's log
file
Logs are collected when the HDLM
utility is executed.
The following is the log file
name:
/var/
DynamicLinkManager/
log/dlmutil[1-2].log
Syslog The HDLM messages on or above the
level set by the user with /etc/
syslog.conf are collected.
#
We recommend that you configure
the system so that information at the
Information level and higher is
output.
Syslogs can be checked using a text
editor.
Syslog is not output by
default.
To output syslog, The syslog
file path is specified in the
file /etc/syslog.conf. For
details, see the AIX
documentation.
HDLM Inquiry log An HDLM Inquiry log is a response
log when the Inquiry command is
issued to the hdisk.
/var/DynamicLinkManager/
log/dlminquiry[1-2].log
HDLM Functions
2-31
Hitachi Dynamic Link Manager User Guide for AIX®