HP XP Racks - Manual (Page 264)

Displayed item
Description
No summary
displayed
Summary
displayed
LUs Total number of LUs managed by HDLM among the
LUs in the storage system
Dynamic I/O
Path Control - The setting information about the dynamic I/O path
control function is displayed for each storage
system.
on: The dynamic I/O path control function is
enabled.
off: The dynamic I/O path control function is
disabled.
-: The dynamic I/O path control function is not
supported.
If an LU whose settings differ from the settings
based on the system storage unit is included, * is
added after the on or off being displayed.
iLU LU number in the storage system
This number combined with the storage system
name (shown in DskName) identifies the LU that is
accessed by a path.
•
For the Lightning 9900V series, Hitachi
Universal Storage Platform 100, Hitachi
Universal Storage Platform 600, Hitachi
Universal Storage Platform 1100, or Hitachi
NSC55, indicated by a hexadecimal number.
The first two characters of iLU are the CU
number, and the last two characters are the
internal LU number within the CU.
• For XP10000/XP12000, or SVS, indicated by a
hexadecimal number. The first three characters
of iLU are the CU number, and the last two
characters are the internal LU number within
the CU. The first character of the CU number is
the value 0.
• For the Thunder 9500V series, Hitachi
AMS2000/AMS/WMS/SMS series, or HUS100
series, indicated by a decimal number. The
entire value of iLU is the internal LU number
within the storage system. You can identify an
actual LU by referencing iLU from the storage
system management program.
• For Universal Storage Platform V/VM series, or
Virtual Storage Platform series indicated by a
hexadecimal number. The first two characters of
iLU are the number of the logical DKC (Disk
Controller), the middle two numbers are the CU
number, and the last two characters are the
internal LU number within the CU.
SLPR
#1
SLPR
#2 The number of the SLPR to which an LU belongs,
indicated by a number from 0 to 31. A hyphen (-) is
6-58
Command Reference
Hitachi Dynamic Link Manager User Guide for AIX®