HP XP Racks - Manual (Page 99)

If an upgrade installation or re-installation fails, perform a new
installation, and then re-execute setup to reflect the settings that have
been backed up.
¢
Save the HDLM environment settings information.
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys > any-file-
name
Make sure that the license has not expired.
¢
Save the HDLM execution environment ODM settings.
# /usr/DynamicLinkManager/bin/dlmodmset -o > any-file-name
Reconfigure the HDLM device. To automatically perform processes
required for the reconfiguration, such as unmounting the file system and
changing the volume group statuses, go to step 3. To manually perform
these processes, go to step 4.
3
.
Execute the utility for removing HDLM devices (dlmrmdev) with the -A
parameter specified.
To inherit the existing hdisk configuration, execute the dlmrmdev utility
with the -e parameter specified. If you execute the dlmrmdev utility
without the -e parameter specified, the existing HDLM device is deleted.
Note that if you want to inherit the existing hdisk configuration when the
installed HDLM version is earlier than 6.2, use the dlmrmdev utility
included in the installation DVD-ROM of the HDLM version to be installed.
When dlmrmdev is executed, a message is displayed asking you to
continue processing. Enter y to continue processing.
To inherit the existing hdisk configuration when the version of the
installed HDLM is earlier than 6.2:
# /directory-in-which-the-DVD-ROM-is-mounted/HDLM_AIX/hdlmtool/
dlmrmdev -e -A
KAPL10528-I The volume group will be made inactive, and the file
system that is using HDLM will be unmounted. Is this OK? [y/n]:y
KAPL10526-I An attempt to unmount the file system has succeeded.
(file system = /mnt/fs01)
KAPL10527-I An attempt to inactivate the volume group has
succeeded. (volume group = vg01)
hdisk7 Defined
hdisk8 Defined
hdisk9 Defined
hdisk10 Defined
KAPL10531-I The status of all of the HDLM drivers was changed to
"Defined".
To inherit the existing hdisk configuration when the version of the
installed HDLM is 6.2 or later:
# /usr/DynamicLinkManager/bin/dlmrmdev -e -A
KAPL10528-I The volume group will be made inactive, and the file
system that is using HDLM will be unmounted. Is this OK? [y/n]:y
KAPL10526-I An attempt to unmount the file system has succeeded.
(file system = /mnt/fs01)
KAPL10527-I An attempt to inactivate the volume group has
succeeded. (volume group = vg01)
hdisk7 Defined
Creating an HDLM Environment
3-37
Hitachi Dynamic Link Manager User Guide for AIX®