HP XP Racks - Manual (Page 259)

Filters the information only for the paths accessing the specified host
device.
Specify hdisk name for host-device-name.
The host-device-name string is case-sensitive.
-pathid AutoPATH_ID
Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example
The following example shows how to display the LU information
without selecting items to be displayed:
# /usr/DynamicLinkManager/bin/dlnkmgr view -lu
Product : USP
SerialNumber : 0014010
LUs : 10
iLU HDevName OSPathID PathID Status
003A hdisk0 00000 000000 Online
00001 000001 Online
003B hdisk1 00000 000002 Online
00001 000003 Online
003C hdisk2 00000 000004 Online
00001 000005 Online
003D hdisk3 00000 000006 Online
00001 000007 Online
003E hdisk4 00000 000008 Online
00001 000009 Online
003F hdisk5 00000 000010 Online
00001 000011 Online
0040 hdisk6 00000 000012 Online
00001 000013 Online
0041 hdisk7 00000 000014 Online
00001 000015 Online
0042 hdisk8 00000 000016 Online
00001 000017 Online
0043 hdisk9 00000 000018 Online
00001 000019 Online
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
To display LU information (by adding items to be displayed)
-lu -item
The items specified with the -item option are displayed among with those
displayed by the -lu option.
When the value of the -item parameter is omitted or all is specified, all
the items, except for DPC, that can be displayed are displayed.
Command Reference
6-53
Hitachi Dynamic Link Manager User Guide for AIX®