HP XP Racks - Manual (Page 420)

Message ID Message Text Explanation
KAPL13021-
E
The file dlnksetfile was not restored. Action
Check file name, and then
try again.
KAPL13101-I The dlmpreremove utility completed
successfully.
Action
None.
KAPL13102-I HDLM can now be removed. Action
None.
KAPL13103-I HDLM can be removed after rebooting
the host.
Action
None.
KAPL13104-I The settings will be changed so that the
HDLM driver is not configured on the
hdisk. Is this OK? [y/n]
Action
To execute dlmpreremove,
enter y.
If you do not want to
execute dlmpreremove,
enter n.
KAPL13105-
W
The entered value is invalid. Re-enter.
[y/n]:
Action
Enter either y or n.
KAPL13106-
E
The entered value is invalid. The
operation will now stop.
Details
The dlmpreremove utility
has been stopped because
an invalid response was
sent three times
consecutively to a request.
Action
To execute dlmpreremove
again, enter either y or n.
KAPL13107-I The user stopped the operation. Details
The dlmpreremove utility
has been terminated
because n was sent to a
request.
Action
None.
KAPL13108-
E
An internal error occurred in the
dlmpreremove utility. Error Code =
aa...aa, bb...bb Execute the DLMgetras
utility to collect error information, and
then contact your vendor or maintenance
company. Refer to the HDLM User's
Guide for instructions how to execute the
DLMgetras utility.
Details
A system-based error, not
caused by the user,
occurred during
dlmpreremove utility
processing.
aa...aa: The error number
which specifies the
performed processing
(decimal number)
8-110
Messages
Hitachi Dynamic Link Manager User Guide for AIX®