HP XP Racks - Manual (Page 124)

When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL06 or AIX
V7.1 with no TL:
# clusterconf -r hdiskxx
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL07 or
later or AIX V7.1 TL01 or later:
# clctrl -start -m node-name
11
.
Execute the following command on the active host to start PowerHA.
# smitty cl_start
Performing an Unattended Installation of HDLM
This subsection explains how to install HDLM using the installhdlm utility.
The unused capacity required to execute the installhdlm utility is as
follows:
• /tmp directory
100 KB
• Any log output directory that can be specified by users (the default
directory is /var/tmp)
200 KB
When Installing HDLM in a Local Boot Disk Environment
To install HDLM in a local boot disk environment:
1
.
Log in to AIX as the root user.
If you are using a virtual I/O server, see the virtual I/O server
documentation to log in to AIX.
2
.
Insert the DVD-ROM.
If you are installing HDLM from a directory in which files on the DVD-ROM
are copied, make sure that the file organization has not been changed. If
the file organization has changed, the installhdlm utility might not
function correctly:
# mkdir /cdrom
# mount -r -v cdrfs /dev/cd0 /cdrom
# mkdir /tmp/hdlm
# cp -rp /cdrom/HDLM_AIX /tmp/hdlm/
# cp -p /cdrom/installux.sh /tmp/hdlm/
If you copied the files on the DVD-ROM to your desired directory, proceed
to step 5.
3
.
If there is no directory for mounting the DVD-ROM, make the directory.
# mkdir /cdrom
3-62
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for AIX®