HP XP Racks - Manual (Page 13)

Chapter Description
4 HDLM Operation on page 4-1 Describes procedures for operating HDLM by using
the HDLM commands, and procedures for manually
starting and stopping the HDLM manager. This
chapter also describes how to configure the
appropriate environment for operating HDLM, such as
changing the HDLM management-target devices that
connect paths or replacing the hardware that
comprises a path.
5 Troubleshooting on page 5-1 Explains how to troubleshoot a path error, HDLM
failure, or any other problems that you might
encounter.
6 Command Reference on page
6-1
Describes all the HDLM commands.
7 Utility Reference on page 7-1 Describes the HDLM utilities.
8 Messages on page 8-1 Provides information about viewing messages output
by HDLM. It also lists and explains the HDLM
messages and shows the actions to be taken in
response to each message.
A Functional Differences Between
Versions of HDLM on page A-1
Explains the differences in functionality between
HDLM versions.
B Differences Between HDLM
Version 5.9 or Later and Version
5.8.1 or Earlier on page B-1
Explains the changes from HDLM version 5.8.1 or
earlier.
Referenced documents
The following Hitachi referenced documents can be found on the applicable
Hitachi documentation CD:
• Hitachi Command Suite Global Link Manager Installation and
Configuration Guide, MK-95HC107
• Hitachi Command Suite Global Link Manager Messages, MK-95HC108
• Hitachi Adaptable Modular Storage Series User's Guide
• Hitachi Simple Modular Storage Series User's Guide
• Hitachi Unified Storage Series User's Guide
• Hitachi USP Series User's Guide
• Hitachi Workgroup Modular Storage Series User's Guide
• Thunder9580V Series Disk Array Subsystem User's Guide
• Reference Manual / File Conversion Utility & File Access Library
• Universal Storage Platform V User's Guide
• Universal Storage Platform VM User's Guide
• Virtual Storage Platform User's Guide
Preface
xiii
Hitachi Dynamic Link Manager User Guide for AIX®