HP XP Racks - Manual (Page 180)

# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -adrv
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -pdrv
Starting and Stopping the HDLM Manager
If an error occurs in the system, such as in an HDLM program, you may need
to manually stop or start HDLM to recover from the error.
Starting the HDLM Manager
To start the HDLM manager, log in to AIX as a user with root permissions and
then execute the following command.
# startsrc -s DLMManager
Lower case characters can be used for the command name (dlmmanager).
# startsrc -s dlmmanager
The startup script that was set up during HDLM installation runs, and starts
the HDLM manager.
Use the following HDLM command's view operation to confirm that the HDLM
manager is running:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
When the HDLM Manager column shows Alive, the HDLM manager is
active.
Stopping the HDLM Manager
To stop the HDLM manager, log in to AIX as a user with root permissions, and
then execute the following command:
# stopsrc -s DLMManager
Lower case characters can be used for the command name (dlmmanager).
# stopsrc -s dlmmanager
The stop script that was set up during HDLM installation runs, and stops the
HDLM manager.
Use the following dlnkmgr command's view operation to confirm that the
HDLM manager has stopped.
4-14
HDLM Operation
Hitachi Dynamic Link Manager User Guide for AIX®