HP XP P9500 Storage - Manual (Page 111)

VSN:DSN[,VOLID1] VSN[,VOLID2] ----- VSN[,VOLIDn]
i) ii) iii) iv)
end
v)
Figure 68 VSN Function
.
1. This parameter is the information for the head volume.
• VSN: A volume serial number with six alphabetic (A-Z, @, #, and \) or numeric (0-9) charac-
ters.
• DSN: Dataset name. (Use a maximum of 44 alphabetic or numeric characters.)
• VOLID1: A VSN identification. (Omit this parameter if a VSN identification is omitted in the
volume definition file, and specify the same as the volume definition file if a VSN identification
is specified in the volume definition file.)
2. This parameter is the information for the second volume.
• VSN: A volume serial number with six alphabetic (A-Z, @, #, and \) or numeric (0-9) charac-
ters.
• VOLID2: A VSN identification. (Omit this parameter if a VSN identification is omitted in the
volume definition file, and specify the same as the volume definition file if a VSN identification
is specified in the volume definition file.)
3. This parameter is the information for the last volume. (The number of volume is n):
• VSN: A volume serial number with six alphabetic (A-Z, @, #, and \) or numeric (0-9) charac-
ters.
• VOLIDn: A VSN identification. (Omit this parameter if a VSN identification is omitted in the
volume definition file, and specify the same as the volume definition file if a VSN identification
is specified in the volume definition file.)
4. Each line above must be separated by pressing Return.
5. The end specifies that the volume definition file ends here.
NOTE:
Each parameter must be separated with one or more space characters.
NOTE:
One dataset information must be specified in one line.
NOTE:
999 information can be specified in the multiple volume definition file.
Using FCU from the Command Line (UNIX)
FCU can be used without the GUI to perform Data Exchange operations. To use FCU without the GUI,
you must start FCU using the -nw option. The FCU options are:
HP StorageWorks P9000 Data Exchange User Guide 111