HP XP P9500 Storage - Manual (Page 66)

NOTE:
This command does not set the License key to falmt.dll. Use the ppkeyset command to set
it.
Example:
# autoppkeyset /temp/12345.plk
PPID=xxx
ppkeyset
12345678901234567890 /usr/bin/fcu
[/usr/bin/fcu] set in available for all days.
---------------------
PPID=xxx
ppkeyset
12345678901234567890 /usr/bin/fcunw
[/usr/bin/fcu] set in available for all days.
---------------------
PPID=xxx
ppkeyset
12345678901234567890 /usr/lib/libfal.xx
[/usr/bin/fcu] set in available for all days.
---------------------
#
Error messages for the autoppkeyset command:
Meaning Error message
Specify the PPID FILE. autoppkeyset [PPID FILE]
The command specified too arguments. Too many arguments.
Install the PPID FILE in the server and execute the command. [PPID FILE] does not exist.
Re-execute the command. [PPID FILE] was not opened.
Check the PPID FILE format. The line is too long. The line must be
under 256 bytes.
Defined line in [PPID FILE] is too long.
Re-execute the command. ppkeyset failed.
Re-execute the command. ppkeyset64 failed.
Creating FXoto Volumes Using the FMT Utility
After the Data Exchange software has been installed on the open-system hosts, you can format the
FXoto volumes using the FMT utility. This enables you to allocate FXoto intermediate datasets. The
FMT utility for UNIX is a UNIX command executed from the UNIX command line. The FMT utility for
Windows is a GUI.
NOTE:
FCU version 01-01-42 or later is required for the FMT utility.
Preparing for Data Exchange Operations 66