HP XP P9500 Storage - Manual (Page 87)

2. Start the FCU GUI as follows: Click Start-Programs-FCU-FCU, or open the c:\ folder and
double-click FCU, or create a shortcut for FCU on the desktop.
NOTE:
Do not start the FCU by dragging and dropping an FCU parameter definition file on the
FCU program icon. FCU program operation cannot be guaranteed.
3. To specify any of the FCU options, start the FCU from the command line (DOS prompt) as follows:
Go to the FCU directory (containing fcu.exe and datasetmount.dat), and enter fcu [-nc]
[-cl] [param]
The -nc option is the same as for UNIX: All specified Data Exchange operations are performed
without confirmation of FCU parameters or FXmto target file overwrites.
The -cl option specifies that all FCU log files will be cleared before starting.
The param option is the same as for UNIX:
• To open a new untitled FCU parameter definition file when you start the FCU, leave the param
option blank.
• To load an FCU parameter definition file when you start the FCU, enter the file name with
complete path if the file is not in the current directory.
4. The FCU GUI program now starts loading. The FCU version and copyright screen (see Figure
46 on page 87) is displayed while FCU is loading. When the FCU is finished loading, the FCU
main panel is displayed (see “ Performing File Transfer Operations (UNIX) ” on page 107).
5. If you started the FCU from the DOS prompt and specified the -nc option, the FCU processes
all specified operations, overwrites existing FXmto target files, and then terminates and displays
any error information at the DOS prompt.
Figure 46 FCU Version and Copyright Screen (Windows Systems)
.
File Conversion Utility Window
The FCU main panel opens when the FCU is finished loading. The FCU main panel displays the FCU
parameter definition file (or Untitled if no file was specified), allows you to perform Data Exchange
operations, and provides access to all FCU functions.
HP StorageWorks P9000 Data Exchange User Guide 87