HP XP Command View Advanced Edition Software - Manual (Page 161)

1
{FROM(nnnn)
1
TO(nnnn)
|FROMVSN(volser)
1
TOVSN(volser)
|STORGRP(SMS-storage-group-name)
}
[
1
ARRAYS(stem-name-3)]
Parameters
STEM(stem-name-1) ~<REXX prefix consisting of 64 or fewer characters>
Specify the prefix (any value) of the host-discovered array structure that stores the scan results.
This value must end with a period.
MSG(stem-name-2) ~<REXX prefix consisting of 64 or fewer characters>
Specify the prefix (any value) of the message structure that stores messages generated by this
command. This value must end with a period.
FROM(nnnn) ~<four hexadecimal characters string>
To filter the range of volume detection by device numbers, specify the device number of the start
volume.
TO(nnnn) ~<four hexadecimal characters string>
To filter the range of volume detection by device numbers, specify the device number of the end
volume.
FROMVSN(volser) ~<six or fewer alphanumeric characters>
To filter the range of volume detection by volume serial numbers, specify the volume serial number
of the start volume.
TOVSN(volser) ~<six or fewer alphanumeric characters>
To filter the range of volume detection by volume serial numbers, specify the volume serial number
of the end volume.
Information in the range specified by the
FROMVSN parameter and TOVSN parameter is compared
in ascending EBCDIC code order.
STORGRP(SMS-storage-group-name) ~<symbol name consisting of 8 or fewer characters>
To restrict the range of volume detection to one SMS storage group, specify the SMS storage
group name.
All volumes belonging to the SMS storage group specified by this parameter will be scanned.
ARRAYS(stem-name-3) ~<REXX prefix consisting of 64 or fewer characters> <<HCC.KTSCAN.>>
Specify the prefix (any value) of the host-discovered array index structure that stores the scan
results. This value must end with a period. Do not specify "HCC.HDAKT.".
Notes
If you change any function or information for the storage system, such as a microcode number, execute
the
KTSCAN command and the KTSTORE command to acquire the storage system information again
and update the definition. In this case, you only have to scan one volume to acquire the storage system
information.
Reference note
• If you want to define offline volumes in a tiering policy group, specify the device numbers for those
volumes when executing the
KTSCAN and KTIMPORT commands.
User Guide 161