HP XP Command View Advanced Edition Software - Manual (Page 209)

to form the log stream name. If a system name starts with a number, the last five characters used
for the log stream name must be unique within the sysplex.
The following shows examples of how a system name starting with a number is converted to the
system name in a log stream name.
• For the system name
1SYS starting with a number and consisting of less than five characters:
YKS is added to the system name to create YKS1SYS .
• For the system name 1SYSTEM starting with a number and consisting of more than five char-
acters:
YKS is added to the last five characters YSTEM to create YKSYSTEM .
• For the system names 1SYSTEM and 2SYSTEM , both of which start with numbers and consist
of more than five characters:
YKS
is added to the last five characters
YSTEM
to create
YKSYSTEM
, which results in two
identical system names. In this case, the system name ( &SYSNAME ) specified for the IEASYSxx
parmlib member must be changed.
For details about system names, see the manual MVS Initialization and Tuning Reference.
DASDONLY(YES)
Specify YES to make the log stream a DASD-only log stream.
MAXBUFSIZE(maxbufsize)
Maximum block size of a log. Specify 64000 (bytes).
STG_SIZE(stg_size)
Specify the size of the staging dataset. Specify a value in the range from 100 (400KB) to 1000
(4MB).
Do not specify this parameter when using an SMS definition.
STG_DATACLAS(stg_dataclas)
Specify the name of the SMS data class used for allocating the DASD staging dataset for this log
stream. Specify this parameter when using an SMS definition.
STG_MGMTCLAS(stg_mgmtclas)
Specify the name of the SMS management class used for allocating the DASD staging dataset
for this log stream. Specify this parameter when using an SMS definition.
STG_STORCLAS(stg_storclas)
Specify the name of the SMS storage class used for allocating the DASD staging dataset for this
log stream. Specify this parameter when using an SMS definition.
LS_SIZE(ls_size)
Specify the size of the DASD log dataset. Specify any size.
The required size depends on the frequency of the output of event log data from the log stream
to a dataset and how event log data is deleted. Specify an appropriate value to prevent the
dataset from being full.
Do not specify this parameter when using an SMS definition.
LS_DATACLAS(ls_dataclas)
Specify the name of the SMS data class used for allocating a log dataset. Specify this parameter
when using an SMS definition.
LS_MGMTCLAS(ls_mgmtclas)
Specify the name of the SMS management class used for allocating a log dataset. Specify this
parameter when using an SMS definition.
LS_STORCLAS(ls_storclas)
User Guide 209