HP XP Command View Advanced Edition Software - Manual (Page 172)

KTERCODE
Function
Outputs the information for the specified error code and the cause of the error to the TSO/E terminal.
Command type
TSO/E command
Format
KTERCODE
1
error-code
Parameters
error-code ~<four hexadecimal characters string>
Specify the sense byte information (error code) for the storage system contained in messages
output by Smart Manager for Mainframe. For details about error codes, see the description of
storage system sense byte information in the Smart Manager for Mainframe Messages.
Return codes
The following table lists and describes the codes returned when the KTERCODE command terminates.
Table 30 Return codes generated by the KTERCODE command
Meaning Return code
The command ended normally. 0
The description of the specified error code was not found. 8
The command ended due to an invalid parameter. 16
The module cannot be loaded. The possible causes are as follows:
• The necessary library datasets are not concatenated.
• The module is protected by the RACF program control function.
64
Example
The following shows an example of executing the KTERCODE command.
CLI commands 172