HP XP Command View Advanced Edition Software - Manual (Page 177)

KTALCSVC
Function
Use this command to register or delete a user SVC.
Command type
OS console command
Format
START
1
KTALCSVC[,PARM='{SVC-number|DELETE}']
Parameters
If you omitted the PARM part of the command, an unused SVC number between 200 and 255 is
assigned.
SVC-number to <number> ~ ((from 200 to 255))
Specify a SVC number to be assigned for the user SVC.
DELETE
Specify this parameter to delete a user SVC.
Notes
If you used the KTALCSVC command to delete a user SVC while Smart Manager for Mainframe was
running, CLI commands that are being executed might terminate abnormally.
Return codes
The following table shows the return codes when the execution of the KTALCSVC command ends.
Table 34 Return codes generated by the KTALCSVC command
Meaning Return code
Successfully completed. 0
The user SVC is already registered. 4
Registration or deletion of the user SVC failed. 16
Processing stopped due to an error (the specified value or execution environment
is invalid).
20
KTDSPENV
Function
Displays the program product name and the Smart Manager for Mainframe operating environment
setting values in the console.
User Guide 177