HP XP Command View Advanced Edition Software - Manual (Page 181)

7 Files used by Smart Manager for
Mainframe
This chapter describes the files used by Smart Manager for Mainframe.
File naming conventions used by Smart Manager for Mainframe
The following table describes the file naming conventions for files used by Smart Manager for
Mainframe.
Table 37 File naming conventions used by Smart Manager for Mainframe
File name File type
prefix.POLICY.policy-ID Tiering policy information CSV file
prefix.DSK.SNnnnnn.LOCAL Disk configuration definition file
prefix.TPG.tiering-policy-group-ID Tiering policy group definition file
• prefix is the character string to be specified in Configuration file prefix on the Edit Defaults
panel, or the character string to be specified in the PREFIX parameter of CLI commands. Make
sure that you specify the same character string for all three types of files used by Smart Manager
for Mainframe.
CAUTION:
If you want to install and use Smart Manager for Mainframe in the same system as Business
Continuity Manager, you must make sure that the prefix character strings for Business Continuity
Manager and Smart Manager for Mainframe are different. If the same prefix is used for both
Business Continuity Manager and Smart Manager for Mainframe, the product may operate
abnormally.
• policy-ID is the identifier of a tiering policy information CSV file. This is the value to be specified
in the POLICY parameter of the KTIMPORT command.
• nnnnn is the serial number of the storage system.
• tiering-policy-group-ID is the identifier of a tiering policy group. This is specified in a
tiering policy CSV file as the name of a tiering policy group.
CAUTION:
Use the disk configuration definition file and tiering policy group definition file as a reference only.
They might not function properly if you change the file contents.
User Guide 181