HP XP Command View Advanced Edition Software - Manual (Page 36)

SETPROG LNKLST,UNDEFINE,NAME=LNKLST99
For details on the SETPROG command, see the manual MVS System Commands.
Setting RACF security for CLI commands
To use Smart Manager for Mainframe CLI commands, you must set up RACF security. Assign user
permissions to use CLI operation commands or CLI reference commands.
Procedure
1. Define profiles for the RACF FACILITY class.
The correspondence between profiles defined for the FACILITY class and the available CLI
commands are shown in the following table.
Table 6 Correspondence between profiles defined for the FACILITY class and the available CLI
commands
Available CLI command Profile defined for the FACILITY class
KTACTTPG
STGADMIN.YKA.DKT.COMMANDS
(Operation profile)
KTDCTDEV
KTDCTTPG
KTIMPORT
KTQRYDEV
KTQRYRLC
KTQRYTPG
KTQSTATS
KTSCAN
KTIMPORT
STGADMIN.YKA.DKT.KTQUERY
(Reference profile)
KTQRYDEV
KTQRYRLC
KTQRYTPG
KTQSTATS
KTSCAN
2. Give users permission to view the operation profile or the reference profile.
For details about how to define RACF profiles and how to assign user permissions to access the
profiles, see the Security Server RACF Security Administrator's Guide.
Installation and setup 36