Setting up the symantec backup exec – HP 3PAR Recovery Manager Software User Manual
Page 31
Figure 6 HP 3PAR Recovery Manager for SQL Properties Account
e.
Click Apply and then select OK. You must restart the service when asked for.
NOTE:
These changes must be done on all the servers wherever the HP 3PAR Recovery
Manager for SQL is running.
•
Symantec Backup Exec
•
Media server user name and password must be same as the Backup Server, or you must add
the current user to Backup Exec
Setting Up the Symantec Backup Exec
NOTE:
To use Symantec Backup Exec with Recovery Manager, either remote administrator
console or typical setup (that is mediaserver, administrator console) must be installed on Recovery
Manager for SQL backup server. Device must be configured in Backup Exec for backup.
1.
Open Symantec Backup Exec administrator console.
2.
From the tool bar, select the device you want to backup.
3.
To configure the device for backup, follow the onscreen instructions.
Configuring Backup Exec
31