HP Integrity NonStop H-Series - Manual (Page 165)

Effect
The command operation fails.
Recovery
Enter the command again and specify both file names.
ftp: connect error-reason
Cause
FTP could not establish a connection for the reason indicated by error-reason. The network
might be unreachable at this time, or the remote host might have rejected the connection.
Effect
The connection is not established.
Recovery
See
“Recovering From Errors” (page 162) .
ftp: connect to address address: error-reason
Cause
FTP failed to establish a connection to the specified address for the reason indicated by
error-reason
.
Effect
The operation fails.
Recovery
See
“Recovering From Errors” (page 162) .
ftp: ftp/tcp unknown service
Cause
The entry for FTP is missing from the $SYSTEM.ZTCPIP.SERVICES file, so FTP cannot determine
which TCP port to use.
Effect
The FTP command fails.
Recovery
Ask the system manager or operator to place an entry for FTP in the SERVICES file.
ftp: getsockname error-reason
Cause
FTP could not determine the data socket address.
Effect
The operation fails.
Recovery
See
“Recovering From Errors” (page 162) .
ftp: setsockopt error-reason
Cause
FTP could not set the socket options. The TCP/IP protocol might not know a specific option.
Effect
The operation fails.
Recovery
See
“Recovering From Errors” (page 162) .
ftp: setsockopt (ignored) error-reason
FTP Error Messages 165