HP Integrity NonStop H-Series - Manual (Page 173)

Cause
The service you selected is not available through the remote TELNET server.
Effect
You cannot use the service at this time.
Recovery
Tell the system manager of the remote system that the service has not been started. Try again
after the service is started.
setsockopt can't wait: error-reason
Cause
A communications problem has occurred. The TCP/IP process might not be running; for example,
an operator might have stopped it.
Effect
TELNET terminates.
Recovery
Ask your system manager if the TCP/IP process is running. See
“Recovering From Errors”
(page 162) .
setsockopt failure: error-reason
Cause
A communications problem has occurred. The TCP/IP process might not be running; for example,
an operator might have stopped it.
Effect
TELNET terminates.
Recovery
Ask your system manager if the TCP/IP process is running. See
“Recovering From Errors”
(page 162) .
setsockopt SO_DEBUG: error-reason
Cause
A communications problem has occurred. The TCP/IP process might not be running; for example,
an operator might have stopped it.
Effect
TELNET terminates.
Recovery
Ask your system manager if the TCP/IP process is running. See
“Recovering From Errors”
(page 162) .
Telnet: connect error-reason
Cause
TELNET was unable to connect to the host for the reason specified by error-reason.
Effect
The connection you requested is not established.
Recovery
See
“Recovering From Errors” (page 162) .
Telnet 'send' error - argument disappeared!
Cause
TELNET detected an internal error while parsing the send command you entered.
TELNET Error Messages 173