HP Integrity NonStop H-Series - Manual (Page 180)

Effect
The TFTPSRV process terminates.
Recovery
Set the TACL PARAM TFTP^HOST^IP to a valid IP address before starting the TFTPSRV process.
vol.subvol: Invalid Subvolume Name
Cause
The location specified is not valid. For example, the location name could have more than the
permissible 36 character, or the location name might not be specified in the correct format.
Effect
Files cannot be uploaded to or downloaded from the specified location.
Recovery
Determine whether the volume and subvolume was specified in the correct format and whether
the subvolume exists on the system.
tftpd: bind_nw error-number
Cause
Binding to a the specified port failed. This might be due to another process that is currently
occupying the port.
Effect
The TFTPSRV process terminates.
Recovery
Check the value of error-number. For an explanation of the error-number, see “Errors”
under the bind-nw heading in the “Library Routines” section of the TCP/IP and TCP/IPv6
Programming Manual.
tftpd: socket_nw error-number
Cause
The socket_nw() call failed to create the socket. For an explanation of error-number, see the
“Errors” subsection of the description of the socket_nw call in the TCP/IP Programming Manual.
Effect
The TFTPSRV process terminates.
Recovery
Make sure that TCP/IP is running. Try restarting the TFTPSRV process.
tftpd: tftp/udp: unknown service
Cause
The User Datagram Protocol (UDP) is not started on the system.
Effect
The TFTPSRV process terminates
Recovery
Have your System Administrator check the SERVICES file to determine whether it contains the
entry tftp:udp. If it does not, the entry must be added.
Unable to find Any Valid subvolume
Cause
All of the vol.subvol names specified at startup of the TFTPSRV are invalid.
Effect
The TFTPSRV process will stop after logging an EMS message and the message “Bringing down
TFTPSRV...”.
180 Error Messages