HP Integrity NonStop H-Series - Manual (Page 167)

Recovery
Delete the old file and enter the command again to retrieve the new file.
netin: error-reason
Cause
The specified error occurred while FTP was receiving data from the network. The socket might
have shut down, the connection might have timed out, or the connection might have been reset
at the remote host.
Effect
The command fails. The data you requested might be incomplete.
Recovery
See
“Recovering From Errors” (page 162) .
netout: error-reason
Cause
The specified error occurred while FTP was sending data to the network. The socket might have
shut down, the connection might have timed out, or the connection might have been reset at the
remote host.
Effect
The operation fails. The remote system does not receive all the data.
Recovery
See
“Recovering From Errors” (page 162) .
No control connection for command error-reason
Cause
The FTP command/control connection was dropped for the reason specified by error-reason.
Effect
The operation fails.
Recovery
See
“Recovering From Errors” (page 162) ix.
Out of memory
Cause
FTP could not allocate enough memory to expand the wild-card name you specified.
Effect
The operation fails.
Recovery
Specify names explicitly, or try the command again with the wild-card name.
Unknown ftpcstm keyword key-word
Cause
The FTPCSTM file contains an incorrect entry.
Effect
In the FTPCSTM file, commands that follow the incorrect entry are not executed.
Recovery
Exit FTP and edit the FTPCSTM file to correct the entry. The acceptable keywords are machine,
login, password, account, macdef, and any FTP command.
FTP API Error Messages
These error messages are returned to the application.
FTP API Error Messages 167