HP Integrity NonStop H-Series - Manual (Page 71)

$55> fup info $abc.source.bigedit,detail
$ABC.SOURCE.BIGEDIT 19 May 1995, 9:16
ENSCRIBE
TYPE U
CODE 101
EXT ( 8 PAGES, 16 PAGES )
ODDUNSTR
MAXEXTENTS 978
BUFFERSIZE 4096
OWNER 8,164
SECURITY (RWEP): NUNU
DATA MODIF: 10 Oct 1994, 8:01
CREATION DATE: 10 Oct 1994, 8:00
LAST OPEN: 19 May 1995, 9:05
EOF: 775804 (2.4% USED)
FILE LABEL: 250 (6.1% USED)
EXTENTS ALLOCATED: 25
At the TACL prompt, start FTP and open a connection to the FTP server using its IPv4 address. (This
example assumes that both hosts have IPv4 addresses.) Then, using the information highlighted in
the above example, issue the FTP put command:
117> ftp
FTP Client - T9552D30 - (31OCT94) - COPYRIGHT TANDEM COMPUTERS INC. 1994
ftp> open 133.255.17.1
Connecting to 133.255.17.1.........Established.
220 comm.Tandem.COM FTP SERVER T9552D30 (Version 2.c TANDEM 31OCT94) ready.
Name (133.255.17.1:guest): manuals.writer
331 Password required for MANUALS.WRITER.
Password:
230 User MANUALS.WRITER logged in.
ftp> put $abc.source.bigedit bigedit,101,8,16,978
200 PORT command successful.
150 Opening data connection for $abc.dest.bigedit (133.255.17.1) (775804 bytes).
226 Transfer complete.
local: bigedit2 remote: $abc.dest.bigedit
746761 bytes received in 2.89 seconds (252.34 Kbytes/s)
ftp>
The time returned on your screen represents the time used to transfer the file, not the total time used
to execute the command.
Example 2
This example copies a local key-sequenced. structured file named keyseq to a remote NonStop
system
First, before starting FTP, obtain a detailed listing of the file:
$PUBS FTPTEST 14> fup info $abc.source.keyseq,detail
$ABC.SOURCE.KEYSEQ 22 May 1995, 11:35
ENSCRIBE
TYPE K
CODE 1001
EXT ( 6 PAGES, 6 PAGES )
REC 4000
BLOCK 4096
IBLOCK 4096
KEYLEN 4
KEYOFF 0
MAXEXTENTS 16
OWNER 8,164
SECURITY (RWEP): NUNU
DATA MODIF: 19 May 1995, 10:11
CREATION DATE: 19 May 1995, 10:11
LAST OPEN: 19 May 1995, 10:11
EOF: 20480 (10.4% USED)
FTP Command Reference 71