Installing eio cards or mass storage devices, Installing eio cards or mass storage, To remove an installed eio card – HP LaserJet 4300 Printer series User Manual
Page 175: To remove an installed eio, To install eio cards or mass storage devices” on
ENWW
Installing EIO cards or mass storage devices 173
Installing EIO cards or mass storage devices
Follow this procedure to install an EIO card or mass storage device (optional hard disk).
To install EIO cards or mass storage devices
1
Turn the printer power off.
2
Remove the two screws and cover plate from the EIO 1 or EIO 2 slot on the back of the
printer.
3
Install the EIO card or mass storage device in the EIO slot and tighten the screws. See the
figure below for orientation of the EIO card.
4
Turn the printer power on and print a configuration page to verify that the new EIO device is
recognized. (See
“Configuration page” on page 83
.)
Note
For information about connecting an EIO card to a network and installing the network software,
see
“Software for networks” on page 33
, the getting started (start) guide that came with the printer,
and also the HP Jetdirect Print Server Administrator’s Guide.
To remove an installed EIO card or mass storage device (optional hard
disk)
1
Turn the printer power off.
2
Remove the EIO card or mass storage device from the EIO slot.
3
Place the cover plate from the EIO 1 or EIO 2 slot onto the back of the printer. Insert and
tighten the two screws.
4
Turn the printer power on.
Use Device Storage Manager in HP Web Jetadmin to manage fonts on a mass storage device.
For more information, see the Help in HP Web Jetadmin.
HP is constantly introducing new software tools for use with your printer and accessories. These
tools are available on the Internet free of charge. See
for more
information.