HP LaserJet 4300 Printer series - Manual (Page 45)

ENWW Loading trays 43
Loading tray 2 or an optional 500-sheet tray
The 500-sheet tray adjusts for six standard sizes (letter, A4, legal,
executive, A5, and JIS B5), as well as for many custom sizes. (See
“Supported sizes and weights of paper” on page 183 .) The printer
senses standard sizes if you set the tray guides to a standard size and
the paper knob to Standard.
If an optional stapler/stacker is installed, the printer automatically
rotates the printed images 180° on all paper sizes, even if the job is not
stapled. If you are printing on paper that requires a specific orientation
(such as letterhead, preprinted paper, prepunched paper, and paper
with watermarks), make sure that the paper is loaded correctly in the
tray. (See
“Orientation of paper when a stapler is installed” on page 38 .)
CAUTION
To avoid paper jams, do not load trays while the printer is printing.
To load tray 2 or an optional 500-sheet tray
1 Remove the tray from the printer.
2 Pinch the release that is located on the left guide and slide the side
guides to the correct paper size.
3 Pinch the release that is located on the rear paper guide and slide it
to the correct paper size.
4 On the right side of the tray, turn the knob to Standard for LTR
(letter), A4, LGL (legal), EXEC (executive), A5, or JIS B5 paper.
Turn the knob to Custom for supported custom paper sizes.
1
2
3
4