HP Photosmart C8180 All-in-One Printer - Manual (Page 116)

Scan an original to a computer
You can scan originals placed on the glass by using the control panel.
To scan to a computer
1. Load your original print side down on the right front corner of the glass.
2. Touch Scan.
The Scan Menu appears.
3. Touch Scan to Computer.
4. If the HP All-in-One is connected directly to a computer with a USB cable, proceed
to step 6.
5. If the HP All-in-One is connected to one or more computers on a network, do the
following:
a. The Select Computer menu appears.
b. A list of the computers connected to the HP All-in-One appears on the display.
c. Touch the required destination computer name.
NOTE: The Select Computer menu might list computers with a USB
connection in addition to those connected through the network.
6. The Scan To menu appears on the display, listing the applications on the computer.
7. Touch the appropriate computer application.
A preview image of the scan appears on your computer, where you can edit it.
8. Make any edits to the preview image, and then click Accept when you are finished.
Related topics
• “Share photos using HP Photosmart Software” on page 101
• “Share a scanned image with friends and relatives” on page 118
Scan an original to a memory card or storage device
You can send the scanned image as a JPEG image to the memory card that is currently
inserted or a storage device that is currently attached to the front USB port. This enables
you to use the photo print options to print borderless prints and album pages from the
scanned image.
NOTE: If the HP All-in-One is connected to a network, you can access the scanned
image only if the card or device is being shared across the network.
To save a scan to a memory card or a memory device.
1. Make sure that either a memory card is inserted into the appropriate slot or a storage
device is attached to the front USB port on the HP All-in-One.
2. Load your original print side down on the right front corner of the glass.
Scan an image 115
Scan